Mechanical
Codes and Standards
Most Popular Mechanical Code and Standards Training Programs
Upcoming Training Programs
All Mechanical Codes and Standards Training Programs
This comprehensive one-day lecture course is designed to mitigate the risk associated with working in confined spaces. It will benefit anyone who has identified permit required spaces and must develop a written program for identifying and evaluating hazards, preventing unauthorized entry and establishing safe entry procedures. This includes safety personnel, maintenance personnel, facility managers, supervisors and personnel who might work in confined spaces.
Every year, approximately 1.6 million Americans perform some type of work activity in a confined space. Working in a confined space can be dangerous. Accidents occur to workers because they fail to recognize that a confined space is a potential hazard. Serious injury and even death can result from asphyxiation, engulfment, electric shock, falls and heat stress. Every worker entering a confined space should consider that the most unfavorable conditions may exist, and the dangers of explosion, asphyxiation and poisoning are present. The Occupational Safety and Health Administration believes that up to 85% of these accidents can be prevented through a successful confined space entry program.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
This course fulfills the requirement of 29 CPR 1910.120 for eight-hour annual refresher training to maintain certification in Hazardous Waste Operations and Emergency Response. Students review and demonstrate competency in key areas of safety in hazardous materials response, and hazardous waste operations. Updates and changes in regulations are presented and discussed.
This course is refresher training for those who already have taken HAZWOPER courses within the last year. It reviews HAZWOPER concepts from previous training and is not meant for inexperienced staff. This course is tailored to the client’s needs.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
This course satisfies the requirements of 29 CFR 1910.120 for the training of personnel who respond to emergency releases of hazardous materials. This course is geared toward personnel who respond to emergency releases of hazardous materials in an aggressive manner. Students will learn how to respond safely to an emergency, identify the materials released, and control or cleanup the spills.
This course is a solution for companies who are focused on other activities but must deal with hazardous cleanup as a necessary component. Spill cleanup is incidental to the primary activity of operations. This course is tailored to the client’s needs.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
The NFPA 101 Life Safety Code® focuses on occupant safety throughout the life cycle of a building, covering both new and existing structures. Updated every three years to reflect evolving safety standards, the current code includes several key updates.
Participants will learn about the requirements that enhance the safety of people and the protection of property and equipment. The course will review construction, protection, and occupancy features necessary to minimize life-threatening dangers from the effects of fire – including smoke, heat, and toxic gases produced during a fire.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
OHSA 10-hour safety training participants will receive the information that is necessary to train and inform employees properly on OSHA standards and learn to design and implement employee protection programs.
Throughout this training program participants will review and discuss OSHA, including citation and penalties and how to avoid them. As well as Learn how to become recognized by the U.S. Department of Labor as having been trained by an OSHA authorized trainer.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
Receive the information that is necessary for you to train and inform employees properly on OSHA standards. Learn how to become recognized by the U.S. Department of Labor as having been trained by an OSHA authorized trainer.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.
Any company that uses any kind of lifts or hoists has operators perform those lifts. This practical hands-on course teaches the how to safely rig and lift known weight loads, the most common rigging and lifting activity in the industry.
Participants on this hoisting and rigging training program will learn about rigging safety and how to calculate the weight of a load, common hitch and sling types, ropes, and locating the load’s center of gravity.
This hoisting and rigging training applies to you if your business is in mining, electrical facilities, transportation, construction, the military, forestry, firefighting, lumber production, or even rope rescue. The practical knowledge gained in our Rigging NCCCO (National Commission for the Certification of Crane Operators) – Level 1 training program will deliver a tangible improvement in both safety and on-the-job performance.
This course is also a test-prep course for the Rigger 1 NCCCO certification. NCCCO is an industry-certification designating someone as a Qualified rigger. Companies are increasingly requiring a Qualified rigger to address insurance costs and damaged-good costs. This course satisfies OSHA’s requirement for a written assessment and practical demonstration exam, administered by a certified rigger, fulfilling a requirement needed to qualify a rigger in their company’s internal rigger program.
NOTE: This is a test prep course. It does not result in NCCCO certification. This course does not “designate” worker as qualified to do rigging. Only the Employer can do this.
Continuing Education Units (CEUs) and Contact Hours
Upon completion of this training program, the attendee will receive a certificate of completion. Please contact your state or local licensing agency to determine if this training program is accepted for Continuing Education recognition by the agency.