Monthly Archives: August 2026

NTT Inc. - Archives for Chris Meehan

Switchgear Safety Starts with Qualified Persons

Tags: arc flash safety, electrical safety training, Job Safety Planning, NFPA 70E, PPE Selection, Switchgear Training

Actionable Tip Have a switchgear safety discussion to see the reasoning why workers are selecting PPE. Is it based on […]

NESC in the Field: Helping Teams Connect On-Site Conditions to the Code

Tags: Electrical Code Training, National Electrical Safety Code, NESC training, utility safety training

Actionable Tip: Use Guided Scenarios to Support NESC Understanding Here are some prompts to support NESC awareness and assess your […]

Studio 5000 PLC Programming (ControlLogix / CompactLogix)

Tags: CompactLogix, ControlLogix, industrial automation maintenance, ladder logic troubleshooting, PLC diagnostics, PLC training, Studio 5000 Logix Designer

What You Need To Know Actionable Tip for Supervisors: Require technicians to verify the fault before making any changes in […]

Grounding and Bonding Essentials in the 2026 NEC: Supervisor Guidance for Verifying the Effective Fault Current Path

Tags: None

Actionable Tip: Implement a quarterly Effective Fault Current Path Verification A practical way to reduce troubleshooting time and prevent noncompliant […]

Texas NEC® 2026 with Law and Electrical Safety

Tags: 2026 NEC training

One Practical Action You Can Take This Month Schedule a 20-minute code navigation drill during a regular crew meeting. Ask […]

The New GFCI Rules Are In — Are Your Electricians Ready?

Tags: GFCI, NEC, NEC 2026

Under the 2023 National Electrical Code (NEC), GFCI protection is no longer limited to residential settings. Expanded requirements now apply […]

Expert Guide to NEC Compliance in New Jersey

Tags: Electrical Compliance, NEC 2026, NEC Training, New Jersey Electrical Code

New Jersey electrical professionals operate within a regulatory environment grounded in the National Electrical Code (NEC) and the New Jersey […]

Why Electrical Safety Observer Training Is the Missing Link in NFPA 70E Compliance

Tags: Electrical Compliance, Electrical Safety Observer, electrical safety training, NFPA 70E

Actionable Tip: Verify Field Work Audits Align with NFPA 70E Observer training empowers your supervisors to gain the competency and […]

NEC: National Electric Code (2026 edition)

Tags: Electrical Compliance, National Electrical Code NFPA 70, NEC 2026, NEC Training

Actionable Tip: Schedule a Quarterly NEC Review to Prevent Costly Rework If you’re a training manager or supervisor overseeing electrical […]

Categories
- Uncategorized (7)
- Electrical Training Programs (96)
  - Code & Standards (30)
  - Electrical Maintenance (18)
  - Mechanical HVAC (9)
  - Safety (39)
- Mechanical Training Programs (75)
  - Code & Standards (10)
  - Electrical Safety (8)
  - HVAC (19)
  - Maintenance (19)
  - Fluid Power (19)
- News (13)
- Onsite Training (2)
- Contractor Management (1)
- National Electric Code (13)
- OSHA Rules and Requirements (19)
- General Safety Tips (4)
- Industrial Safety (4)
- Plumbing Standards (3)
- Electrical Blueprint Reading (6)
- Natural Gas Safety (3)
- Ultrasonic Testing (1)
- PLC (12)
- High Voltage (4)
- Oil Analysis (2)
- Centrifugal Pumps (4)
- Variable Frequency Drives (6)
- Welding Safety (7)
- Chillers (3)
- Hazardous Locations (5)
- Confined Spaces (6)
- Infrared Thermography (2)
- NFPA 72 (4)
- Process Control Loops (3)
- Backflow Prevention (1)
- Electrical Grounding (2)
- Industrial Circuits (2)
- Boilers (5)
- Shaft Alignment (3)
- Hoisting and Rigging (3)
- Fiber Optics (5)
- Refrigeration (1)
- Arc Flash (8)
- NFPA 110 (1)
- Conveyor Systems (1)
- NFPA 70E (2)
- Process Instruments (1)
- Vibration Analysis (1)
- Industrial Generators (2)
- Life Safety Code (4)
- Electrical Switchgear (1)
- NFPA 79 (2)
- Steam Distribution Systems (2)
- Preventative Maintenance (2)
- Electrical Codes & Standards (5)
- Mechanical Maintenance (5)
- Mechanical Fluid Power (1)
- Electrical Safety (2)